Weight Distribution Hitches for Trailers and RVs

FAQs: Weight Distribution Hitches

What is a weight distribution hitch and do I need one?

A weight distribution hitch is a towing system that uses spring bars to redistribute a portion of the trailer's tongue weight across all axles of both the tow vehicle and trailer. Without one, heavy tongue weight concentrates at the rear of the tow vehicle, causing the rear to sag, the front to lift, and handling and braking to suffer. You generally need a weight distribution hitch when your trailer's gross weight exceeds 50% of your tow vehicle's curb weight, or whenever the rear of your vehicle noticeably sags when connected to a loaded trailer. They are particularly important when towing travel trailers, fifth wheels, or any trailer over roughly 5,000 lbs.

What weight distribution hitch models does Enthuze offer?

Enthuze offers four round bar weight distribution hitch models: the Round Bar Weight Distribution Hitch in 10K (SKU ACTENTWD52) and 14K (SKU ACTENTWD57), both priced at CAD $429.99, and the Round Weight Distribution Hitch with Sway Control, Ball and Chains in 10K (SKU ACTENTWD62) and 14K (SKU ACTENTWD63), both priced at CAD $489.99. The base models include the hitch head, spring bars, shank, hookup brackets, and hardware, while the Sway Control kit bundles add a sway control bar, trailer ball, and chains for a complete ready-to-tow package.

What is the towing capacity of Enthuze weight distribution hitches?

Enthuze weight distribution hitches are available in two capacity ratings. The 10K models support up to 10,000 lbs gross trailer weight (GTW) and up to 1,000 lbs tongue weight (TW). The 14K models are rated for up to 14,000 lbs GTW and up to 1,400 lbs TW. Both capacities use the same round bar spring bar design and 2-inch shank, making them compatible with standard class 3, class 4, and class 5 trailer hitch receivers. Always verify that your vehicle's tow rating and hitch rating also meet or exceed the load you're pulling — the lowest-rated component in the towing system is always the governing limit.

Do Enthuze weight distribution hitches include sway control?

It depends on the model. All Enthuze weight distribution hitches feature integrated sway control attachment tabs built into the hitch head, meaning sway control can be added to any model. However, the sway control kit itself — including the sway control bar, trailer ball, and chains — is only included with the "With Sway Control" bundle models (ACTENTWD62 and ACTENTWD63). If you purchase a base model (ACTENTWD52 or ACTENTWD57), the tabs are present but you'll need to purchase a compatible sway control unit separately. For most travel trailer and RV applications, choosing the bundle with sway control included is the recommended approach.

What receiver size do Enthuze weight distribution hitches fit?

Enthuze weight distribution hitches use a 2-inch shank that can be flipped to provide the required drop or rise to level the tow vehicle and trailer combination. The 2-inch shank fits any standard 2"x2" receiver tube opening, covering the vast majority of class 3, class 4, and class 5 trailer hitches. If you're running a heavy class 5 hitch with a 2-1/2" receiver, a compatible replacement shank is available separately.

What is included in the box with an Enthuze weight distribution hitch?

The base Enthuze round bar weight distribution hitch includes the shank, spring bars, hitch head, hookup brackets, and pin and clip. The Sway Control bundle models additionally include the sway control system and a pre-torqued trailer ball. A grease zerk fitting is built into the hitch head on sway control bundle models for continuous lubrication — note that grease must be applied separately at installation and maintained over time.

How do I set up an Enthuze weight distribution hitch?

The Enthuze weight distribution hitch uses hookup brackets and a lift handle to make leveraging the spring bars easier, and the chain snap-up design simplifies tensioning without specialized tools. Setup involves mounting the hitch head to the ball mount, attaching the spring bars, applying tension via the hookup brackets, and adjusting the head angle until the tow vehicle sits level front-to-rear. If a sway control bar is included or added, it mounts to the built-in sway control attachment tab on the head and clamps to a bracket on the trailer A-frame. Most experienced towers can complete setup in under 30 minutes, though first-time setup may take longer while learning the correct tension and leveling adjustments.

What finish is used on Enthuze weight distribution hitches and how durable is it?

Enthuze weight distribution hitches are protected by a highly durable carbide powder coat finish designed to resist corrosion, chips, and weathering over years of towing use. This is the same carbide black powder coat finish used on premium aftermarket towing products and provides significantly better long-term durability than painted or zinc-plated finishes.

What warranty do Enthuze weight distribution hitches come with?

Enthuze weight distribution hitches are backed by a limited lifetime warranty, with one-year coverage on the finish and parts. This means the structural components of the hitch carry a lifetime warranty against defects, while finish and replacement parts are covered for the first year from the date of purchase. If you have a warranty concern, Enthuze's customer service team can assist with claims via enthuze.ca.

Where can I buy an Enthuze weight distribution hitch in Canada?

Enthuze weight distribution hitches are available directly through enthuze.ca, with the 10K and 14K base models priced at CAD $429.99 and the sway control bundle models priced at CAD $489.99. Free shipping is available across Canada. Enthuze products are also stocked by select Canadian truck accessory retailers and available through Amazon.ca. Financing options are available at checkout through Affirm and Flexiti for qualifying purchases.